product category
You are here: Home / Products / Parts / Arc Chamber / 10-Plate Stepped MCB Arc Chute 3021188 Cu-Ni Plated 10# Steel Green Fiber Arc Extinguisher

10-Plate Stepped MCB Arc Chute 3021188 Cu-Ni Plated 10# Steel Green Fiber Arc Extinguisher

Heavy-Duty OEM Miniature Circuit Breaker (MCB) Arc Chamber (Item No. 3021188).
Engineered with 10 stepped de-ion splitter plates stamped from 10# cold-rolled carbon steel featuring a thick dual-layer Copper (5μm) + Nickel (6μm) electroplating finish, supported by dual green vulcanized fiber side boards. Delivers extreme thermal dissipation, superior corrosion and arc wear resistance, and rapid 10-stage arc splitting for high-breaking DIN-rail MCB distribution devices.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
  • Arc Chamber

  • HAIPART

  • 3021188

Stepped 10-Plate & Heavy Cu-Ni Plated Arc Chamber for MCB

In high-breaking modular DIN-rail distribution systems, Miniature Circuit Breakers (MCBs) require rapid thermal diffusion and exceptional arc ablation endurance within tight spatial envelopes. The 3021188 MCB Arc Chamber combines a specialized stepped 10-plate geometry with an ultra-thick Copper (5μm) + Nickel (6μm) dual-layer coating to deliver superior fault interruption performance.

Configured with 10 de-ion splitter plates stamped from high-permeability 10# cold-rolled steel and secured by dual green vulcanized fiber side boards, this modular assembly ensures fast arc intake, high-efficiency heat sinking, and long-term dielectric stability.


Key Technical Parameters & Material Specifications

Product Part Number 3021188 (Stepped MCB De-ion Arc Chute)
Structural Configuration 10 Stepped De-ion Splitter Plates + 2 Support Side Boards
Grid Plate Material 10# Cold-Rolled Carbon Steel (High magnetic saturation & stamping accuracy)
Dual-Layer Electroplating Copper (5μm) + Nickel (6μm) Composite Coating (11μm total thickness; extreme heat & wear resistance)
Side Wall Support Green Vulcanized Fiber Paper (High mechanical toughness, arc-resistant & gas-evolving)

Engineering Advantages & Extinguishing Principles

  • Heavy 5μm Cu + 6μm Ni Dual Coating: The thick 5μm copper underlayer rapidly conducts intense arc spot heat across the grid body, while the 6μm nickel top layer provides unmatched resistance against high-temperature plasma erosion, oxidation, and spatter bridging.
  • Stepped Geometry Optimization: The tiered 10-plate profile conforms closely to moving contact swing paths, ensuring immediate magnetic arc capture and compact spatial fitment inside modular MCB casings.
  • 10-Stage Series Arc Splitting: Divides the single primary fault arc into 11 series short arcs, multiplying cumulative near-electrode voltage drops to exceed circuit recovery voltage for early current zero-crossing extinction.
  • Gas-Assisted Deionization (Green Fiber): Under severe electric arc heat, the dual green vulcanized fiber side boards decompose trace neutralizing cooling vapors that compress the plasma stream and prevent restrikes.

Frequently Asked Questions (FAQ)

Q1: What is the engineering benefit of combining 5μm Copper + 6μm Nickel dual-layer plating?

A1: With a total protective thickness of 11μm, the 5μm copper base layer maximizes lateral thermal conductivity to prevent localized melt-through, while the thick 6μm nickel outer barrier resists corrosion and arc pitting across high-cycle short-circuit interruptions.

Q2: Why is this arc chamber designed with a stepped 10-plate profile?

A2: A stepped profile matches the internal mechanical layout of compact miniature breakers, allowing maximum plate count and arc-splitting capacity without interfering with adjacent trip mechanisms or terminals.

Q3: Can HAIPART customize stepped arc chutes and multi-layer plating thicknesses?

A3: Yes. We provide full OEM/ODM precision stamping and assembly customization, accommodating tailored stepped contours, plate counts, Cu/Ni plating ratios, and side wall dimensions based on your technical drawings.


HAIPART – One Partner | All Solutions

Professional OEM/ODM Manufacturer of Circuit Breaker Stamping Parts, Arc Chutes & Mechanisms

Email: Sales@haipart.com  |  Tel / WhatsApp: +86-13819777367

Personnel
300+
Technology
spot welding
assembly
Riveting
stamping
Patent
12
Parts
Arc Chamber
Terminals
Stamping Parts
Coils
Wires
Assemblies
Magnetic Core
Magnetic Trip Unit
Thermal Trip Unit
Operating Mechanism
Contact Assembly
Connector Assembly
End Products
MCB
MCCB
RCCB
RCBO
SPD
SCB
Electronic Over Current Relay
ACB
Railway Contactor
CamSwitch
Previous: 
Next: 
We believe that through our manufacturing strengths and service commitment, we are able to provide our customers with superior products and an unparalleled service experience.​​​​​​​
Follow Asendia