Views: 0 Author: Site Editor Publish Time: 2026-11-20 Origin: Site
In low-voltage circuit breakers, the arc chute plays an essential role in controlling and extinguishing electrical arcs during circuit interruption.
A typical arc chute consists of multiple U-shaped cold-rolled steel splitter plates arranged in a stack, together with insulating side plates. These components form the internal structure that helps divide and cool the arc.
To maintain the required assembly geometry, the splitter plates and insulating parts must be securely joined. Riveting is a widely used mechanical joining process for this purpose.
Unlike welding, riveting does not rely on melting the base materials. Instead, a rivet is mechanically deformed to hold multiple layers together. This makes it suitable for assembling thin metal plates and insulating components into a compact arc chute structure.
The quality of riveting directly affects the mechanical stability and dimensional consistency of the assembled unit. Incorrect riveting may cause plate displacement, deformation or damage to insulating parts.
Different riveting methods can be selected according to the component structure, material thickness, production volume and assembly requirements.
Orbital riveting, also known as radial or wobble riveting, forms the rivet tail through an angled, rotating tool movement.
Because the forming force is applied progressively to a localized area, this method can help reduce the impact on thin stacked components. It is often considered for assemblies where deformation control is important.
Direct-press riveting forms the rivet by applying axial pressure to deform its tail in a single pressing operation.
This method offers a relatively straightforward forming process and can support efficient production. However, the pressing force and stroke must be carefully controlled. Excessive force may cause splitter plate displacement, plate deformation or damage to insulating components.
HAIPART uses direct-press riveting in its low-voltage circuit breaker arc chute assembly process.
In automated production lines, rivet strips can be fed continuously, cut to the required length and formed during the assembly cycle.
This approach can support synchronized and high-volume production, depending on the equipment configuration and component design.
The appropriate method should always be determined by the actual arc chute structure and manufacturing requirements.
For HAIPART's arc chute assemblies, direct-press riveting is used to secure the stacked splitter plates and insulating side components.
The process involves several important stages:
Component Preparation
Before assembly, stamped splitter plates should be checked for burrs, contamination and dimensional consistency. Insulating side plates should also be inspected for visible damage or missing material.
Stacking and Positioning
The splitter plates are arranged in the specified sequence and positioned using an assembly fixture. Accurate positioning helps maintain the intended plate alignment and spacing.
Rivet Insertion and Pressing
Rivets are inserted into the aligned holes before the pressing operation. The riveting equipment applies axial force to deform the rivet tail and secure the component stack.
Pressing stroke and force must be matched to the rivet dimensions and assembly structure to avoid excessive compression.
Cleaning and Inspection
After riveting, metal particles and debris should be removed from the assembly. The completed arc chute is then checked for appearance, dimensions and joint integrity.
Riveting quality involves more than simply ensuring that the rivet is firmly attached. Several factors require attention:
Plate Alignment: Splitter plates should remain correctly positioned after riveting.
Plate Spacing: The designed gaps between plates must be maintained. Excessive compression or displacement may affect the intended arc-splitting structure.
Rivet Forming: The rivet tail should be uniformly formed, without visible cracks, incomplete forming or looseness.
Insulation Protection: Pressing conditions must avoid cracking or damaging the insulating side plates.
Cleanliness: Metal particles and other debris must be removed from the arc chute cavity.
These factors should be evaluated against the component drawings, process specifications and applicable product requirements.
An arc chute is a precision assembly in which multiple metal and insulating components must work together as designed.
Riveting provides the mechanical connection that holds these components in position. Consistent positioning, controlled forming and appropriate inspection help maintain the structural integrity of the finished assembly.
At HAIPART, direct-press riveting is part of the manufacturing process for low-voltage circuit breaker arc chute components. By focusing on assembly accuracy and process control, we support the production of consistent components for MCB and MCCB applications.
Reliable arc chute assembly starts with precise component joining.
Arc chute riveting is a mechanical joining process used to secure multiple splitter plates and insulating side components into an assembled arc chute.
Orbital riveting forms the rivet progressively through an angled rotating tool movement, while direct-press riveting applies axial pressure to form the rivet tail in a pressing operation.
HAIPART uses direct-press riveting for its low-voltage circuit breaker arc chute assembly process.
The splitter plates must retain their designed arrangement and spacing to preserve the intended arc-splitting structure. Excessive compression or plate displacement may affect arc chute performance.
Typical inspection items include plate alignment, overall dimensions, rivet forming quality, insulating part condition, joint integrity and internal cleanliness. Specific acceptance criteria should follow the product drawings and inspection specifications.